TRUE ORIGINAL

SINCE 2010

BEWARE OF IMITATION

 

  • 1
  • 2
  • 3
  • 4

Rocking File

 

GUITAR and BASS (UKULELE is coming soon)

-Total Size: 100 mm (length) x 20 mm (height) x 20 mm (width)

-Rocker edges: A) 100 mm, B) 59 mm, C) 41 mm

-Diamond file: #400 grit 15mm x 15mm (total 2 units)

-Material: Aluminum, 2 mm thick (aluminum is softer and more gentle with your frets and strings)

 

For custom order please Contact.

 

 

 

Rocking File

The Rocking File™ is a special tool designed to check and fix the height of your guitar's frets while keeping the strings on.

Why is it called the Rocking File? It's a combination of fret leveling with strings on® and a fret rocker. The Rocking File can work on three frets at a time, making it super handy!

The Rocking File has three lengths on its rocker section to cover all the frets from low to high. It's all you need!

The best part? You can use the Rocking File Fret Checker and Leveler on the go. Its special design allows you to check, file and even test your frets while still being able to play your guitar. Talk about saving time and being precise! And don't worry about carrying it around either. It's small enough to fit in your instrument case or pocket.


How to use the Rocking File Checker and Adjuster:

A) First things first! Always make sure your frets are not loose or detached. Then, place the Rocking File rocker section vertically between the strings on the frets you want to check. Choose an edge that spans three frets. Hold it with both hands and check for any rattling, just like using a rocker. Move along, checking one set of three frets at a time until you've checked the entire fretboard.

B) If the Rocking File reveals a high fret with some rattling, roll the tool and slide the abrasive surface under the strings, placing it on top of the higher fret. Gently sand the fret and check again with the Rocking File rocker section. Oh, and don't forget to test the fret by playing it! Once the fret is nice and even, and the annoying buzz is gone, you can make it even better by crowning or refinishing it however you like.

That's it! With the Rocker File you can keep your frets in perfect shape and rock out with confidence. It's a secret weapon for a fantastic guitar-playing experience!

 


Feel free to ask if you need any custom version or any other information!

 

 

RR Kit (reload/refinishing kit)

Reload And Refinishing Kit is all you need to reload the leveling tool and crown the frets after leveling them with one of our systems. The file in the Kit typically covers two or more fret level works. LittleBone #150 grit would last more than the LittleBone #400 grit but it would also leave deeper marks to refinish. Advise when you contact if you prefer LB150 in your Kit, instead of the LB400.

 

It contains:

-1 LittleBone Fret File #400grit

-1 roll 0.64mm x 2.9m self-adhesive abrasive #320 grit for reloading and refinishing that will replace the little roll coming with the stand alone tool

-2 Masking size of masking tape for fretboard protection (9 mm and 18 mm)

-1 abrasive fiber #600 grit for refinishing

 

 

 

*Kit is sold only with one of our fret leveling tools for additional US$38.

Luthier tools

  • R.M.KATANA

    KATANA FRET LEVELING SYSTEM is a system designed for leveling the frets, or the fretboard, under real strings tension Read More
  • BUZZ Killer

    More information about this invention: Reference fret level For all instruments - 132 mm This innovative tool Read More
  • Rocking File

    The Rocking File™ is a special tool designed to check and fix the height of your guitar's frets while Read More
  • MONSTER RAIL mini

    Tired of guessing how to perform a fret leveling in playing condition without the relief? We have the solution! Read More
  • LittleBone Fret File

    LittleBone fret file helps to reshape frets worn by use or flattened out after fret leveling. LittleBone Fret File is Read More
  • RR Kit (reload/refinishing kit)

    RR Kit (reload/refinishing kit) can be purchased only with a fret leveling tool like: R.M.KATANA, R.M.LITE, R.M.BUZZ Killer. Read More
  • LittleBone ice

    LittleBone ice is bigger than the classic LittleBone Fret File. It is easier to hold. It lasts longer because Read More
  • BOOMERANG FRET FILE

    Say Hello to the new born 2 Corner fret file! This new tool is quite foolproof. It is aggressive Read More
  • TREM GUARDIAN

    By Inventor Davide Bissoli here is a new tremolo stopper for guitar setup and repair. The TREM GUARDIAN is Read More
  • DRAGONCLAW

    DRAGONCLAW is a tuning tool designed to operate on Floyd Rose Tremolo. It was designed to leave the area Read More
  • Digital Action Gauge

    With this device you can measure the Action of the strings and the neck Relief with no need… Read More
  • FRETBLADE

    FRETBLADE™ is a special fret leveling tool that includes: Reference fret level, Adjustable relief, Single fret and spot level Read More
  • UNDERSTRING FRET CROWNING FILE

    Understring Crowning File is a proper fret crowning file designed to work underneath the string without altering the playing Read More
  • UNDERSTRING FLK mini

    UNDERSTRING FLK mini is a system designed for spot leveling the frets, or the fretboard, under strings tension. Fret Read More
  • ZZ-BONE

    This tool is similar to a LittleBone for small or very small frets like those often installed on ukulele Read More
  • 1
  • 2

Price list

REMINDER: to buy our tools please make sure to visit the How to buy page first. Thank you 


Prices are in USD

Final shipping price may vary depending on volume, weight and final destination of the order.

International shipping price is minimum $32. At the moment most destinations are covered by EMS which is quality service but it can be more expensive than certain other services that we have been using until a few years ago which aren't available at this time.

*There might be some lower prices for those Countries that still offer economy shipping services. Please let us know where you buy from so we can check the latest shipping options and prices for your Country.

RED is out of stock

RR Kit is accessory (sold only with a leveling tool)


R.M.KATANA for guitar $220 +Shipping  $32
R.M.KATANA for guitar Limited Edition 440mm $165 +Shipping  $32
R.M.KATANA for bass $255 +Shipping  $42
R.M.nanoKATANA *uke $145 +Shipping  Ask
R.M.BUZZ-Killer single fret and spot leveler  $80 +Shipping  Ask
R.M.LITE for guitar  $40 +Shipping  Ask
R.M.LITE for bass  $55 +Shipping  $38
Rocking File  $18 +Shipping  Ask
UNDERSTRING FLK mini  $59 +Shipping  Ask
RR Kit (reload/refinishing)  $38 Accessory  
LittleBone #400 grit  $20 +Shipping  Ask
LittleBone #150 grit  $24 +Shipping  Ask

LittleBone DoubleAngle #400 grit

 $28 +Shipping  Ask
LittleBone DoubleAngle #150 grit  $28 +Shipping  Ask

LittleBone DoubleGrit

(#400+#150grit)

 $28 +Shipping  Ask
LittleBone ice #320 grit  $28 +Shipping  Ask
LittleBone ice #150 grit  $28 +Shipping  Ask
LittleBone ice DoubleGrit  $42 +Shipping  Ask
LittleBone ice Special  $38 +Shipping  Ask
Digital Action Gauge  $34 +Shipping  Ask
FRET RAIL mini  $16 +Shipping  Ask
Feather File for nut   $20 +Shipping  Ask
BOOMERANG FRET FILE  $43 +Shipping Ask
TREM GUARDIAN  $39 +Shipping $15
DRAGONCLAW  $25 +Shipping Ask

 

Copyright © 2010 - 2024 RECTIFY Master. All Rights Reserved.