|
LoginOnce I made sure the finger board was level by adjusting the truss rod, I marked the tops of the frets with a permanent marker. The actual levelling of the frets was surprisingly easy. Job done when I had abraded the tops of all the frets. After removing the strings, I masked all the frets off so I could start the crowning with the 'Little Bone'. It did the job very well, with the end result being very good. I am impressed with this system and if the instruction are followed, it is virtually idiot proof. I would like to thank you Davide for giving me the opportunity to try your very well crafted tools. When I get to the stage where I am doing a lot more setups, I will be investing in your 'Katana' system. Thank you again and please keep making great and innovative tools. Hello Dave, Great service. I fixed my strat. It is great now. It has 6100 frets, the ordinary file couldn't fix it but LittleBone did! Buy Rectify or win it with "RECTIFY MANIA" on our Hi Davide, Once I made sure the finger board was level by adjusting the truss rod, I marked the tops of the frets with a permanent marker. The actual levelling of the frets was surprisingly easy. Job done when I had abraded the tops of all the frets. After removing the strings, I masked all the frets off so I could start the crowning with the 'Little Bone'. It did the job very well, with the end result being very good. I am impressed with this system and if the instruction are followed, it is virtually idiot proof. I would like to thank you Davide for giving me the opportunity to try your very well crafted tools. When I get to the stage where I am doing a lot more setups, I will be investing in your 'Katana' system. Thank you again and please keep making great and innovative tools. Hello Dave, Great service. I fixed my strat. It is great now. It has 6100 frets, the ordinary file couldn't fix it but LittleBone did! Buy Rectify or win it with "RECTIFY MANIA" on our Hi Davide, Once I made sure the finger board was level by adjusting the truss rod, I marked the tops of the frets with a permanent marker. The actual levelling of the frets was surprisingly easy. Job done when I had abraded the tops of all the frets. After removing the strings, I masked all the frets off so I could start the crowning with the 'Little Bone'. It did the job very well, with the end result being very good. I am impressed with this system and if the instruction are followed, it is virtually idiot proof. I would like to thank you Davide for giving me the opportunity to try your very well crafted tools. When I get to the stage where I am doing a lot more setups, I will be investing in your 'Katana' system. Thank you again and please keep making great and innovative tools. Hello Dave, Great service. I fixed my strat. It is great now. It has 6100 frets, the ordinary file couldn't fix it but LittleBone did! Buy Rectify or win it with "RECTIFY MANIA" on our Hi Davide, Once I made sure the finger board was level by adjusting the truss rod, I marked the tops of the frets with a permanent marker. The actual levelling of the frets was surprisingly easy. Job done when I had abraded the tops of all the frets. After removing the strings, I masked all the frets off so I could start the crowning with the 'Little Bone'. It did the job very well, with the end result being very good. I am impressed with this system and if the instruction are followed, it is virtually idiot proof. I would like to thank you Davide for giving me the opportunity to try your very well crafted tools. When I get to the stage where I am doing a lot more setups, I will be investing in your 'Katana' system. Thank you again and please keep making great and innovative tools. Hello Dave, Great service. I fixed my strat. It is great now. It has 6100 frets, the ordinary file couldn't fix it but LittleBone did! Buy Rectify or win it with "RECTIFY MANIA" on our Hi Davide, Once I made sure the finger board was level by adjusting the truss rod, I marked the tops of the frets with a permanent marker. The actual levelling of the frets was surprisingly easy. Job done when I had abraded the tops of all the frets. After removing the strings, I masked all the frets off so I could start the crowning with the 'Little Bone'. It did the job very well, with the end result being very good. I am impressed with this system and if the instruction are followed, it is virtually idiot proof. I would like to thank you Davide for giving me the opportunity to try your very well crafted tools. When I get to the stage where I am doing a lot more setups, I will be investing in your 'Katana' system. Thank you again and please keep making great and innovative tools. Hello Dave, Great service. I fixed my strat. It is great now. It has 6100 frets, the ordinary file couldn't fix it but LittleBone did! Buy Rectify or win it with "RECTIFY MANIA" on our Hi Davide, Once I made sure the finger board was level by adjusting the truss rod, I marked the tops of the frets with a permanent marker. The actual levelling of the frets was surprisingly easy. Job done when I had abraded the tops of all the frets. After removing the strings, I masked all the frets off so I could start the crowning with the 'Little Bone'. It did the job very well, with the end result being very good. I am impressed with this system and if the instruction are followed, it is virtually idiot proof. I would like to thank you Davide for giving me the opportunity to try your very well crafted tools. When I get to the stage where I am doing a lot more setups, I will be investing in your 'Katana' system. Thank you again and please keep making great and innovative tools. Hello Dave, Great service. I fixed my strat. It is great now. It has 6100 frets, the ordinary file couldn't fix it but LittleBone did! Buy Rectify or win it with "RECTIFY MANIA" on our Hi Davide, Once I made sure the finger board was level by adjusting the truss rod, I marked the tops of the frets with a permanent marker. The actual levelling of the frets was surprisingly easy. Job done when I had abraded the tops of all the frets. After removing the strings, I masked all the frets off so I could start the crowning with the 'Little Bone'. It did the job very well, with the end result being very good. I am impressed with this system and if the instruction are followed, it is virtually idiot proof. I would like to thank you Davide for giving me the opportunity to try your very well crafted tools. When I get to the stage where I am doing a lot more setups, I will be investing in your 'Katana' system. Thank you again and please keep making great and innovative tools. Hello Dave, Great service. I fixed my strat. It is great now. It has 6100 frets, the ordinary file couldn't fix it but LittleBone did! Buy Rectify or win it with "RECTIFY MANIA" on our Hi Davide, Once I made sure the finger board was level by adjusting the truss rod, I marked the tops of the frets with a permanent marker. The actual levelling of the frets was surprisingly easy. Job done when I had abraded the tops of all the frets. After removing the strings, I masked all the frets off so I could start the crowning with the 'Little Bone'. It did the job very well, with the end result being very good. I am impressed with this system and if the instruction are followed, it is virtually idiot proof. I would like to thank you Davide for giving me the opportunity to try your very well crafted tools. When I get to the stage where I am doing a lot more setups, I will be investing in your 'Katana' system. Thank you again and please keep making great and innovative tools. Hello Dave, Great service. I fixed my strat. It is great now. It has 6100 frets, the ordinary file couldn't fix it but LittleBone did! Buy Rectify or win it with "RECTIFY MANIA" on our Hi Davide, Once I made sure the finger board was level by adjusting the truss rod, I marked the tops of the frets with a permanent marker. The actual levelling of the frets was surprisingly easy. Job done when I had abraded the tops of all the frets. After removing the strings, I masked all the frets off so I could start the crowning with the 'Little Bone'. It did the job very well, with the end result being very good. I am impressed with this system and if the instruction are followed, it is virtually idiot proof. I would like to thank you Davide for giving me the opportunity to try your very well crafted tools. When I get to the stage where I am doing a lot more setups, I will be investing in your 'Katana' system. Thank you again and please keep making great and innovative tools. Hello Dave, Great service. I fixed my strat. It is great now. It has 6100 frets, the ordinary file couldn't fix it but LittleBone did! Buy Rectify or win it with "RECTIFY MANIA" on our Hi Davide, Once I made sure the finger board was level by adjusting the truss rod, I marked the tops of the frets with a permanent marker. The actual levelling of the frets was surprisingly easy. Job done when I had abraded the tops of all the frets. After removing the strings, I masked all the frets off so I could start the crowning with the 'Little Bone'. It did the job very well, with the end result being very good. I am impressed with this system and if the instruction are followed, it is virtually idiot proof. I would like to thank you Davide for giving me the opportunity to try your very well crafted tools. When I get to the stage where I am doing a lot more setups, I will be investing in your 'Katana' system. Thank you again and please keep making great and innovative tools. Hello Dave, Great service. I fixed my strat. It is great now. It has 6100 frets, the ordinary file couldn't fix it but LittleBone did! Buy Rectify or win it with "RECTIFY MANIA" on our Hi Davide, Once I made sure the finger board was level by adjusting the truss rod, I marked the tops of the frets with a permanent marker. The actual levelling of the frets was surprisingly easy. Job done when I had abraded the tops of all the frets. After removing the strings, I masked all the frets off so I could start the crowning with the 'Little Bone'. It did the job very well, with the end result being very good. I am impressed with this system and if the instruction are followed, it is virtually idiot proof. I would like to thank you Davide for giving me the opportunity to try your very well crafted tools. When I get to the stage where I am doing a lot more setups, I will be investing in your 'Katana' system. Thank you again and please keep making great and innovative tools. Hello Dave, Great service. I fixed my strat. It is great now. It has 6100 frets, the ordinary file couldn't fix it but LittleBone did! Buy Rectify or win it with "RECTIFY MANIA" on our Hi Davide, Once I made sure the finger board was level by adjusting the truss rod, I marked the tops of the frets with a permanent marker. The actual levelling of the frets was surprisingly easy. Job done when I had abraded the tops of all the frets. After removing the strings, I masked all the frets off so I could start the crowning with the 'Little Bone'. It did the job very well, with the end result being very good. I am impressed with this system and if the instruction are followed, it is virtually idiot proof. I would like to thank you Davide for giving me the opportunity to try your very well crafted tools. When I get to the stage where I am doing a lot more setups, I will be investing in your 'Katana' system. Thank you again and please keep making great and innovative tools. Hello Dave, Great service. I fixed my strat. It is great now. It has 6100 frets, the ordinary file couldn't fix it but LittleBone did! Buy Rectify or win it with "RECTIFY MANIA" on our Hi Davide, Once I made sure the finger board was level by adjusting the truss rod, I marked the tops of the frets with a permanent marker. The actual levelling of the frets was surprisingly easy. Job done when I had abraded the tops of all the frets. After removing the strings, I masked all the frets off so I could start the crowning with the 'Little Bone'. It did the job very well, with the end result being very good. I am impressed with this system and if the instruction are followed, it is virtually idiot proof. I would like to thank you Davide for giving me the opportunity to try your very well crafted tools. When I get to the stage where I am doing a lot more setups, I will be investing in your 'Katana' system. Thank you again and please keep making great and innovative tools. Hello Dave, Great service. I fixed my strat. It is great now. It has 6100 frets, the ordinary file couldn't fix it but LittleBone did! Buy Rectify or win it with "RECTIFY MANIA" on our Hi Davide, Once I made sure the finger board was level by adjusting the truss rod, I marked the tops of the frets with a permanent marker. The actual levelling of the frets was surprisingly easy. Job done when I had abraded the tops of all the frets. After removing the strings, I masked all the frets off so I could start the crowning with the 'Little Bone'. It did the job very well, with the end result being very good. I am impressed with this system and if the instruction are followed, it is virtually idiot proof. I would like to thank you Davide for giving me the opportunity to try your very well crafted tools. When I get to the stage where I am doing a lot more setups, I will be investing in your 'Katana' system. Thank you again and please keep making great and innovative tools. Hello Dave, Great service. I fixed my strat. It is great now. It has 6100 frets, the ordinary file couldn't fix it but LittleBone did! Buy Rectify or win it with "RECTIFY MANIA" on our Hi Davide, Once I made sure the finger board was level by adjusting the truss rod, I marked the tops of the frets with a permanent marker. The actual levelling of the frets was surprisingly easy. Job done when I had abraded the tops of all the frets. After removing the strings, I masked all the frets off so I could start the crowning with the 'Little Bone'. It did the job very well, with the end result being very good. I am impressed with this system and if the instruction are followed, it is virtually idiot proof. I would like to thank you Davide for giving me the opportunity to try your very well crafted tools. When I get to the stage where I am doing a lot more setups, I will be investing in your 'Katana' system. Thank you again and please keep making great and innovative tools. Hello Dave, Great service. I fixed my strat. It is great now. It has 6100 frets, the ordinary file couldn't fix it but LittleBone did! Buy Rectify or win it with "RECTIFY MANIA" on our Hi Davide, Once I made sure the finger board was level by adjusting the truss rod, I marked the tops of the frets with a permanent marker. The actual levelling of the frets was surprisingly easy. Job done when I had abraded the tops of all the frets. After removing the strings, I masked all the frets off so I could start the crowning with the 'Little Bone'. It did the job very well, with the end result being very good. I am impressed with this system and if the instruction are followed, it is virtually idiot proof. I would like to thank you Davide for giving me the opportunity to try your very well crafted tools. When I get to the stage where I am doing a lot more setups, I will be investing in your 'Katana' system. Thank you again and please keep making great and innovative tools. Hello Dave, Great service. I fixed my strat. It is great now. It has 6100 frets, the ordinary file couldn't fix it but LittleBone did! Buy Rectify or win it with "RECTIFY MANIA" on our Hi Davide, |
globaltop
|
*The Login is for the Online manual only and it is reserved to regular buyers/owners of KATANA, LITE, FLK and BUZZ Killer tools. For the online manual you don't need to register and also this function is not enabled. Please, check in the package of your tool for the Quick start sheet with your personal username and password. All information is subject to change without notice. The content of this pages is property of RECTIFY Master. RECTIFY/Master technology is patented, utility model and patent pending. RECTIFY Master® is a registered Trademark. Fret leveling with strings on® is a registered trademark. Fretboard and tool gauges™, LITE™, KATANA fret leveler™, Adjusting bow fret leveling tool™, BUZZ-Killer™, ACTION-Finder™, LittleBone fret file™, Advanced string raiser™, play cleaner play faster™ are intended as Trademarks. |
© Copyright RECTIFY Master 2010 - 2013. All rights reserved.